Date: December 15th, 2008
Article by: Joe Anderson (Hardware Reviewer)
Edited By: Nathan Glentworth (Owner / Head Editor)
Product was submitted by: Vantec USA
<--CLICK FOR PRICES ON A CPU COOLER IN THE UNITED STATES
<--CLICK FOR PRICES ON A CPU COOLER IN CANADA
VANTEC AEROFLOW FX120 INTRODUCTION
Vantec has been in the PC aftermarket for a very long time. Some of the accessories in my first home-built computer had the Vantec logo on them. They always had very attractive and innovative products that would keep your computer cool and look cool as well.
Recently, the new AeroFlow FX120 CPU cooler arrived at the Tweaknews labs and I'm excited to see how it looks and performs.
SMALL HEATPIPE TECHNOLOGY TUTORIAL
I am going to keep this as simple as possible to get the basic premise across to all of the Tweaknews readers. Please don't be insulted if this is too simple for your education level. I have to cater my writing to the least technical reader looking for information.
The basic idea behind heatpipe technology is really simple.
1.) With a tube containing a compressed fluid/gas, the fluid comes in contact with the heat source (the cpu core, in this case) which heats up the volatile fluid and turns it to a gas. The energy is absorbed in the gas production process and is ready for transportation.
2.) The heated gas now travels along the inner portion of the tube where it comes to the cooling portion of the heatsink in this example.
3.) The radiator, with or without a fan, will cool the liquid and transfer the energy (AKA heat) to the radiator to be dispersed to the surrounding air. With the heat removed, the vapor quickly condenses back to a fluid and runs along the inside surface of the pipe, back down to the bottom, where the process can be started all over again.
For another example, you can consider a boiling pot of water with a glass lid as a very very basic heatpipe. When the water boils, the water vapor comes in contact with the cooler glass pot lid which forces the vapor to condense back to water, where it dribbles back down the inside of the lid back into the pot.
It's basic, but it gets the point across.