Date: December 1st, 2009
Article by: Jackie Mueller (Hardware Reviewer)
Edited By: Nathan Glentworth (Owner / Head Editor)
Product was submitted by: Thecus
<--CLICK FOR PRICES ON A THECUS NAS IN AMERICA
<--CLICK FOR PRICES ON A THECUS NAS IN CANADA
PRODUCT PICTORIAL AND WALKTHROUGH
The trays are removed by simply pulling on the latch. If you will be installing 2.5” drives, each one needs to be secured to its respective tray with four screws.
But what if you want to install 3.5” drives? Well, it’s really easy to switch. The cage that houses the 2.5” drives pulls straight out after you unscrew the two thumbscrews that hold it in.
After the 2.5” drive cage is removed, you are left with a nice open area to install up to three 3.5” drives. Let’s continue on with the installation.
PRODUCT INSTALLATION AND TESTING
Each 3.5” drive needs a rail snapped in on each side. No tools are needed. Once the rails are on, just insert the drive into the bay and tighten it down with the thumbscrews.
When all the drives are installed you can close the door, plug all necessary cables in and turn the unit on.