Date: July 27th, 2006
Article by: Nathan Glentworth (Owner / Head Editor)
Product was submitted by: Sansun
 <--SHOP FOR A COMPUTER CASE HERE
PRODUCT SPECIFICATIONS AND FEATURES
Features:
1 Meshed frontal design to scatter thermal inside the casing 2 Dual frontal fan for high heat dispatching inside case bay 3 Temperature display on front panel 4 ATX and BTX form factor 5 Incredible Air duct design can be installed w/ a12cm fan for optional cooling 6 Gamers' dreaming 5.25 x 9 bays 7 . Screw less structure 8. Optional Meshed circle side panel
(Note: specs are taken directly from Sansun's website. Pay attention, we'll touch on these later.)
PRODUCT PICTORAL AND WALKTHROUGH
Time to take a walk around the Galaxy.
My first impression of this case is the size. For a mid-tower, this case is huge. It's a full three inches deeper than my other mid-towers, and only one inch of that can be attributed to the case door.
Starting with the front, your eyes are immediately drawn to the case door. Two 80mm, LED lit fans reside at the top and bottom, while a temperature monitor and single-channel fan controller sits in the middle. To the side, you can see a large mesh circular vent. Also present is a pair of USB ports, headphone and microphone jacks, and a FireWire port, located on the side of the case bezel. Fan speeds are controlled by a single, vertical style dial.
Opening the door reveals the drive bays and the back of the front fans.
On the other side of the case, you can see a series of grommeted holes.
|
