Date: April 20th, 2002
Article by: Nathan Glentworth (Head Editor & Hardware Reviewer)
Product was donated by: Kingwin Inc.

INSTALLATION GUIDE

Just as a small addition, I am going to include a visual installation guide just to help the hardware rookies out there or just a person that hasn't installed one of these units before. The actual install is really easy and will take a total of about a half an hour. All the tools you will need is a phillip's screwdriver and some patience. This will be a quick and dirty version, but anything that I miss telling you will be explained in the pictures. Also, the guide will apply to both models seeing that they are pretty well identical. The case that I will be demonstrating the install on is the Xoxide Enlight Breeze (A Beautiful Pre-Modded Case). Stay tuned for a great full review on the case alone. Okay, here we go...

Step #1:

Remove the tray from the rack frame.

Step #2:

Now completely slide off the aluminum cover.

Step #3:

Now connect the power and IDE connectors.

Step #4:

Carefully slide the harddrive into the tray and secure it with the included screws.

Step #5:

Slide the aluminum cover back onto the tray.

Step #6:

Install the frame into the case just like you would a CD-ROM using screws or the quick connect guides that some cases include. Well there, everything is pretty well ready to go.

Step #7:

Connect the IDE and power cables to the back of the unit and to your motherboard.

Step #8:

When pushing the tray into the frame, be careful and don't ram it in. Treat it like a lady and ease it in gently =). (Da boyz at Hardocp.com will get a kick out of that one) Now lift up the handle and push it in all the way. Push the lever down and the unit is ready to be fired up.

Step #9:

And remember, you will need to lock the mobile rack in order for it to power up.