Date: January 4th, 2011
Article by: Matt Lee (Hardware Reviewer)
Edited By: Nathan Glentworth (Owner / Head Editor)
Product was submitted by: DeepCool
 <--CLICK FOR DEALS ON A VGA COOLER IN THE UNITED STATES
 <--CLICK FOR DEALS ON A VGA COOLER IN CANADA
PRODUCT COMPOSITION (cont'd)
Pulling back a fabric tab displays two 92mm blue fans. They are lined in custom fitted foam and certainly eye catching. Upon removing the fans I noticed the feel is quite different. These fans are not manufactured with simple hardened plastic; rather they feel of soft rubber which is key for anti-vibration.
Removing the fans exposes the main heatsink. It also sits in custom foam holder and far away from any damage from shipping movement. Tucked underneath the heatsink is a small white box containing the necessary mounting accessories and instruction manual.
PRODUCT PICTORIAL AND WALKTHROUGH
Here we have the DeepCool V6000 in all its glory. You can see the six large heat-pipes that start at the base and run the length of the cooler. The high aluminum fin density over the heat-pipes allows the heat to dissipate much quicker due to increased surface area. In general a dense fin per inch design is suited best with higher rpm/static pressure fans and alternatively a lower fin per inch design would be best matched with fan capable of less rpm/pressure. It's a good thing these two 92mm fans only run at 1800rpms.
|
