---

Article by: Joe Anderson (Hardware Reviewer)
Edited By: Nathan Glentworth (Owner / Head Editor)
Product was submitted by: Antec
<--CLICK FOR DEALS ON AN ANTEC KUHLER 620 SYSTEM IN THE UNITED STATES
<--CLICK FOR DEALS ON A LIQUID COOLING SYSTEM IN CANADA

 

 

PRODUCT PICTORIAL AND WALKTHROUGH

The main unit consists of an aluminum radiator and tubes leading to the pump/waterblock module. Power for the pump is delivered via twisted wiring terminating in a 3-pin power connector. As an added bonus, there is also a separate 3-pin connector for the fan, allowing the user to power both the pump and fan from a single motherboard header. The copper base, with its pre-applied TIM, comes with a protective plastic cover. Lugs around the perimeter of the housing give the block a gear-like appearance, but are integral to the mounting scheme, as we'll see a bit later.

Unlike many of these all-in-one units, the 620 features tubing that is very flexible that will, in conjunction with the swivel fittings, make installation much easier.

There's not much information available on the fan, but the mounting solutions are well documented in the installation guide. We'll go over these items in more detail during the installation section of this review. In fact, let's get right to it.