CASE MOD (cutting a hole)

corNIC · Posted: Thu Sep 11, 2003 5:47 pm Post subject: CASE MOD (cutting a hole)

I am considering enlargeing my 80mm top exhaust fan to 120mm, because almost all of my heat issues exist there. Does anyone have any suggestions for a good tool to use for cutting the case itself. I dont want it to look like crap and I know that it is possible to make look good one way or another.

just weighing my options.

1) purchase a better 80mm
2) mod and insert a 120mm on top

It is very important that I remove heat from top because my WC radiator is mounted in top drive bay and needs all the cool air it can get.

lata!
_________________
~corNIC~

Abit IC-7
P4 2.4C WaterCooling OC 3.6Ghz
Geil Ultra P3200 2x256
Asus GF3 V8200
10GB 10000rpm SCSI / 80GB WD 7200rpm /
2 Yamaha CRW-F1 Burners 44X

Nexus rheostat / 2 Delta 80mm 80CFM / 3 Antec Exhaust.

Google · Sponsor

alexvdl · SirTweaksabit Joined: 05 Aug 2003 Posts: 311

Either a Dremel or a nibbling tool seems to be what you need. If it were up to me and you have the ability to do botth.... mod in a 120.... make the case yours. *nods*
_________________
__________[(Crayola)]>_____________
Althon xp 2100+ @ 2100+, DFI LANParty nForceII Ultra Rev. B, 512 of Kingston, and an Evil Wizard Radeon 7500!