2 System's Done

Lowvez · TweakNOOB Joined: 12 Feb 2004 Posts: 161

Well, me and Magnaflow finally got our systems revamped. I had to change hoses and resize them for my system and then put it back together. Magnaflow basically started from scratch with his watercooling that he had before except he increased it like a champ.

My system involves the following:

Swiftech Kit (the on with the 1 blue rad)
3 Vantec Tornados (2 Rear Exhaust, 1 on the rad)
Dexcool orange (actually almost a red) additive
CPU waterblock and GPU block.

Temps:
Idle, 32c
Full Load, 36-37c

Keep in mind that my barton 2500+ is jacked up to 200fsb and up to 1.750v

If i keep all tornados jacked up all the way the full load doesn't go above 35c.

Not too shabby! Now let magnaflow tell you his setup! It's nuts!

Google · Sponsor

Lowvez · TweakNOOB Joined: 12 Feb 2004 Posts: 161

How much do you think adding a 2nd of the same rad would bring the temps down if it had a tornado on it too? and would a faster pump make it go down even more?

gmoney · Posted: Tue Feb 15, 2005 12:05 am Post subject:

well i would assume that a faster pump with just one rad would move the water to quickly thus the heat is not removed as thoroughly.. if u had two rads and a faster pump it might lower temps ... might

Lowvez · TweakNOOB Joined: 12 Feb 2004 Posts: 161

magnaflow · TweakNOOB Joined: 05 Feb 2005 Posts: 20

My system included

swift-tech mcp650 pump.
Maze4 p4 water block
77 Bonnivlle heater core(rad)
1/2ID and 3/4OD Tubing
Dexcool water mix
2 Vantec 120mm fans rad
Thats my water setup

Idle 29c
Load 35

redid my entire system. Case and all I will show pick soon watch fro pic on a new thread.
_________________
http://img221.exs.cx/img221/6412/magnaflow17rx.jpg