xdreamer cleaning

Yoshida · UberTweaker Joined: 24 Dec 2003 Posts: 1219

Just a quick question, is it possible to remove the acrylic front off of the front of the case? quite a bit of dust has collected under it and it could use a good clean.

Google · Sponsor

ToggleHead · TWEAKGURU Joined: 03 Mar 2004 Posts: 4360 Location: Jersey

you know im sure there IS a way to remove it.......but im not so sure you could reattach it......lol

just get some compressesed air.........gently lift up the side slightly and spray in the side
_________________

-=Pyro-Psycho=- · Tweakafile Joined: 26 Dec 2003 Posts: 935 Location: TN

The first x-dreamer I think has screws attaching the front bezel.
The x-dreamer 2 has plastic push pins that hold it on.

I might be mistaken about the first, I think I read it somewhere.
_________________
Love Is Not Enough...

ToggleHead · TWEAKGURU Joined: 03 Mar 2004 Posts: 4360 Location: Jersey

i dont htink he means the whole front of the case....i think he means JUST the plasic front plate on the case front.........
_________________

[KoG]^weaZel · Posted: Fri Jul 16, 2004 11:20 am Post subject:

like Polar Pyro has stated the first ones you could remove the whole front and then take the front panel apart . Because on the backside of the chrome knobs are screws that holds everything in place. But on the second ones I dont know but I would guess that they have someway of taking it apart in the same or similar manner. But the first step is to remove the front panel assembly front the case. And there may be a screw on each side holding the front panel on from the inside of the case. If there are then it will be located on each side of the drive cage.
_________________
I tweaked and it tweaked back! So I Tweaked some more!

"Barney is like the Michael Jackson of PBS." - James Tybeerious

Yoshida · UberTweaker Joined: 24 Dec 2003 Posts: 1219

thanks guys, i got the acrylic off.

[KoG]^weaZel · Posted: Fri Jul 16, 2004 11:43 am Post subject:

but now to the important part can you get it back on?!

_________________
I tweaked and it tweaked back! So I Tweaked some more!

"Barney is like the Michael Jackson of PBS." - James Tybeerious

Yoshida · UberTweaker Joined: 24 Dec 2003 Posts: 1219

yeah nothing broke

all you have to do is pull out the little white things, then push the silver cap out.

ToggleHead · TWEAKGURU Joined: 03 Mar 2004 Posts: 4360 Location: Jersey

SEEEE!!!!

i got nothin.........=P
_________________

-=Pyro-Psycho=- · Tweakafile Joined: 26 Dec 2003 Posts: 935 Location: TN

Mine broke, but I used a chisel and a sledge.
_________________
Love Is Not Enough...

[KoG]^weaZel · Posted: Fri Jul 16, 2004 2:11 pm Post subject:

DOH I just realized I used the wrong pyro name!!

_________________
I tweaked and it tweaked back! So I Tweaked some more!

"Barney is like the Michael Jackson of PBS." - James Tybeerious

ToggleHead · TWEAKGURU Joined: 03 Mar 2004 Posts: 4360 Location: Jersey

LMAO
_________________

PolarPyro · Posted: Fri Jul 16, 2004 2:45 pm Post subject:

LOL

_________________

[TN] Nathan · ALMIGHTY PWNER! Joined: 14 Feb 2002 Posts: 7406

Moved.

Why was this in General Hardware.

Yoshida, you know better.
_________________
Owner & Administrator
www.Tweaknews.net
www.Pocketbookpinch.com

Josh · Posted: Fri Jul 16, 2004 5:13 pm Post subject: