FS/FT: XP1600+, 256MB PC2700, Linux System, More...

[Jason]

I have the following for sale / trade. In trades all I am looking for a mATX format Socket A motherboard (nForce2, preferably), a 4 port (maybe a 2 port) USB KVM switch, and a 800MHz fsb'ed P4. Could add money to the deal on my end for these items...

What I have:

1. AMD XP1600+ AGOGA that did 170 fsb on my A7N8X board, will include a Spire Microflow I heatsink fan... $35 US, plus shipping

2. 256MB PC2700 Samsung OEM DDR. Single sided stick. Now has a red colored aluminum heatspreader on it, which required a second strip of thermal tape on the back since there were no chips there (just looks funny on edge view). Runs great on an IWILL XP-333R, never oc'ed... $25 US, plus shipping

3. IWILL XP-333R Motherboard with original packaging, documents, cds, and ide ribbons. DDR slot number one does not work, but I have been using the above memory in slot two with no problem for months. Flashed to current BIOS, supporting modern XP cpus (I am using an XP2200+). Onboard 6 channel sound and Highpoint RAID. I honestly haven't used either, but they should be fine... $30 US, plus shipping. LINK

4. Taisol Socket A Heatpipe Heatsink... $12 US, plus shipping. LINK

5. PC Toys AeroMaxx Heatsink with 70mm TMD fan. Same exact thing as the Vantec AeroFlow... $12 US, plus shipping. LINK

6. 56x CD-ROM, was beige but now painted black (nice paint job). It works great, but I never tested the speed, which I am basing on the model number printed on it: AGI CD-ROM Drive MARY500... $10 US, plus shipping.

7. Two identical, complete Packard Bell Pentium I 120MHz systems... 80 Megs memory, 1 Gig hard drives, video, lan, modem, sound, cd-rom, floppy in desktop style cases. With Win98SE installed. Fully functional... $30 US, each plus shipping or local pickup.

8. Complete system with Linux Mandrake 9.1 installed. Has a PC Chips motherboard with onboard 4 channel sound, 10/100 lan, 8mb or 16 mb shared agp video, 56k modem, usb, 1 pci slot, 1 isa slot, 3 sdram slots. Shown here: LINK

Also has:

AMD K6-2 450 cpu with Duron 1000 style heatsink installed
256 MB (2x128) Tonicom Tiny BGA PC-166 SDRAM
15GB ATA-66 5400 RPM IBM Deskstar
1.44" Floppy
2x (or maybe 4x) cd-rom
250W ATX PSU
Beige mini-tower case

All setup and ready to go... Works great, and all drivers were found and installed in Mandrake 9.1. $100 US, plus shipping - or local pick-up... Pickup I'll throw in the keyboard and Logitech scroll mouse.

-----------------------------------
For pickups... Madison NJ is about 25 miles west of New York City...

If anyone takes a combo of a minimum of the motherboard, xp cpu, and ddr... I'll throw in a generic type 320W psu that handled a decent system with idle voltage readings around 5.03V and 11.98V...
-----------------------------------
Heatware

Check, MO, Paypal...

[Google]

[[TN] Nathan]

Some good deals here, man, I really liked the Tonicom ram when it was out.

That stuff overclocked like mad.
_________________
Owner & Administrator
www.Tweaknews.net
www.Pocketbookpinch.com

[Jason]

Yeah, the Tonicom stuff is pretty sweet, these are actually from OCZ... physically it reminds me of the GeiL Dragon DDR you see today... Pretty much going to waste on that 100MHz fsb'ed K6-2, but its the only sdram I had when I built that thing... Haha!!

Presently items 1-4 are pending as sold...