| View previous topic :: View next topic |
| Author |
Message |
frigidVintage TweakNOOB

Joined: 05 Dec 2005 Posts: 48 Location: Minnesota
|
Posted: Wed Jan 02, 2008 10:37 pm Post subject: Shock proofing your hands |
|
|
So when you guys go into your computer do you ground yourself with one of those wrist things or what?
Couldn't I use latex gloves or is that the wrong idea? |
|
| Back to top |
|
 |
Google Sponsor
|
Posted: Wed Jan 02, 2008 10:37 pm Post subject: Advertisement |
|
|
|
|
| Back to top |
|
 |
sandness SirTweaksabit

Joined: 18 Oct 2004 Posts: 274 Location: is everything
|
Posted: Thu Jan 03, 2008 12:00 am Post subject: |
|
|
I never use a grounding strap at home or at work. I always touch the case of a computer while it is plugged in before I work on it to eliminate any static charge on me. I also make it a point to stay in one spot while working to avoid building up static. This method has always served me well, even at home on my carpeted floor. I wouldn't bother with latex gloves, unless you need to give a prostate exam at the same time... _________________ •Asus P5K SE •Q6700 •4GB G.Skill •BFG 512MB GeForce 8800GT
•Swiftech MCW6000 CPU block •MCP350 pump •MCW30 chipset block •2 x MCR120 rad
•Audigy II •Fortron 500w •24” Acer LCD •320GB Seagate SATA2 •200GB Maxtor SATA2 |
|
| Back to top |
|
 |
Xal Lord of the Tweak

Joined: 15 Jul 2004 Posts: 2858 Location: Tweaknation =P
|
Posted: Thu Jan 03, 2008 4:04 am Post subject: |
|
|
I pretty much do the same as Sandness. Static caused hardware failure is a lot less common than it used to be and even in the past it was rare. That being said, some people build up more static than others. If you are one of those people then take all the precautions you can before working on your kit. The latex gloves idea won't do you any good. It will just make things more difficult to work on. Usually touching a grounded chasis periodicaly will be sufficient to dispel static buildup. If you are one of those people that had great fun zapping people with static growing up and still get zapped by the ocasional door handle then get a strap, you can never be too safe and they only cost a couple of $.
Patience will save more failures than any antistatic device, most human caused failure I have seen has been due to impatient rushed jobs. Take your time, read the manual and do it right  _________________ Phenom II x4 955 @ Stock
Asus M3N78-EM
4gb Corsair XMS2 DDR2 667 @ 800
1gb Powercolor Radeon HD 5850 @ Stock
X-fi Extreme Audio PCI E
Nexus 600W Silent PSU
Nexus Fans
Custom case |
|
| Back to top |
|
 |
frigidVintage TweakNOOB

Joined: 05 Dec 2005 Posts: 48 Location: Minnesota
|
Posted: Thu Jan 03, 2008 12:54 pm Post subject: |
|
|
| Thanks guys. I have done some work inside my computer with and without wearing a strap but now its dry winter in Minnesota and I'm shocking my case every other time I touch it (carpeted floor too). |
|
| Back to top |
|
 |
Xal Lord of the Tweak

Joined: 15 Jul 2004 Posts: 2858 Location: Tweaknation =P
|
Posted: Thu Jan 03, 2008 3:02 pm Post subject: |
|
|
Then get yourself a strap dude
Its better to be over cautious than to fry something. _________________ Phenom II x4 955 @ Stock
Asus M3N78-EM
4gb Corsair XMS2 DDR2 667 @ 800
1gb Powercolor Radeon HD 5850 @ Stock
X-fi Extreme Audio PCI E
Nexus 600W Silent PSU
Nexus Fans
Custom case |
|
| Back to top |
|
 |
|