Connecting Audigy 2 to Case Audio Panel

Josh

Question is in the topic name.

There is no documentation for this with my case or sound card, and no luck with the net .

Xaser 3
Audigy 2 ZS

Thank ye
_________________
»4 RS«»1Ж «»1 DENE«»1 FREAKIN LAME OH«»1 MONEY MONEY«
(-)

Google · Sponsor

Zero_Fresh · Posted: Wed Feb 09, 2005 2:33 pm Post subject:

Can you post come pictures? I am having a hard time imagining what you are looking at. Someone might be able to figure it out for you by looking at it.
_________________
"....Or as almost every word in a sentence; Tweak the tweaking tweakers!"

Josh Awards = 2

Josh · Posted: Wed Feb 09, 2005 3:05 pm Post subject:

Ill get some pics done for weekend. Feel free to post if ya know

_________________
»4 RS«»1Ж «»1 DENE«»1 FREAKIN LAME OH«»1 MONEY MONEY«
(-)

[KoG]^weaZel · Posted: Wed Feb 09, 2005 6:12 pm Post subject:

use the leads that were included in the case :)
_________________
I tweaked and it tweaked back! So I Tweaked some more!

"Barney is like the Michael Jackson of PBS." - James Tybeerious

Josh · Posted: Wed Feb 09, 2005 7:04 pm Post subject:

Yes i realise that weaze

Its just, where do i connect the audio leads to on the Audigy?
_________________
»4 RS«»1Ж «»1 DENE«»1 FREAKIN LAME OH«»1 MONEY MONEY«
(-)

[KoG]^weaZel · Posted: Wed Feb 09, 2005 11:50 pm Post subject:

here ya go.

1 - Ground
2 - Left out
3 - Audio Backpanel Mute -- short to ground to mute the backpanel (when headphones are plugged in)
4 - Right out
5 - Audio Back panel mute (same as 3)
6 - Mic input
7 - blank
8 - VREF out (used for the mic)
9 - MIC IN MUTE -- grounded when mic isn't plugged in, +12VDC when mic is plugged in
10 - Audio cable detect (not used)

Pin 1 should be on the right hand side next to the SB logo.

I hope this helps as I cant find a manual that says anything about the leads on the xaser III. good luck
_________________
I tweaked and it tweaked back! So I Tweaked some more!

"Barney is like the Michael Jackson of PBS." - James Tybeerious

Josh · Posted: Thu Feb 10, 2005 7:20 pm Post subject:

Yeah that should help...i know what the pins are on the xaser panel...i just didnt have a clue where the corresponding pins are on the SB....ill update you when i check it out...thanks alot weaze!
_________________
»4 RS«»1Ж «»1 DENE«»1 FREAKIN LAME OH«»1 MONEY MONEY«
(-)