help/advise from the gurus appreciated - 2.4 to 3.3GHz

[shion]

hi there,

im quite new to this overclocking world and have finally gotten the courage to overclock my pc - been a month now since i got my rig so - its not so brand new that ill hate myself if i break it :)

anyways, here's my current config after much reading and researching which i hope is ok...n not potentially killing my machine. btw my specs are as follows:

asus p4p800 deluxe (std/original heatsink/fan)
power supply 450watt (came with casing)
p4 2.4c
1 x kingston value ram pc3200 400mhz 512mb - single channel - dimm 3-3-3
hercules 3d prophet 9600 pro 128mb
maxtor ide hdd
asus dvd + cdrw

-----------------------------------------------------
config
-----------------------------------------------------
fsb - 285 mhz @ 3.3 ghz
cpu vcore voltage - set to auto but doing abt 1.584-1.6v
+12v - 11.795
+5v - 4.972
+3.3v - 3.28
cpu idle temp - 33-34Celcius
hyper threading - enabled
performance mode - turbo (not sure wht this is)

DDR voltage - auto
memory acceleration mode - enabled
fsb:dram - 3:2
dram freq - 186.9 mhz
cas latency - 2.0 clocks
3(tRP) - 3(tRCD) - 7(tRAS)
DRAM burst - 8 (what is this? the other avail option is 4)

agp/pci - 66.66/33.33 mhz
agp aperture - 128mb (shld i increase it to 256?)
agp voltage - 1.50v

TIA

[Google]

[[TN] Nathan]

There are already two long threads on 2.4C help in the overclocking section of the forum.

All questions can be answered through them.
_________________
Owner & Administrator
www.Tweaknews.net
www.Pocketbookpinch.com