Help Overclocking P4 2.6C @ 1Ghz FSB

greenjizz · TweakNOOB Joined: 26 Sep 2003 Posts: 1

I just bought a new system

P4C800-E
P4 2.6C with Thermalright slk-900-u
1GB OCZ PC4000 Dual Chan Gold

and need help overclocking it. I was kinda hoping to run it at 1GHZ FSB like this link http://www.tomshardware.com/motherboard/20030812/index.html
I took at look at the bios but can't figure it out. Like where do I set the FSB to 250, change vdimm, voltage and any other settings I may need to change. I know how to change timings though:) If someone has a link or the patience to point me in the right direction that would be appreciated.
Thanks,

GJ

Google · Sponsor

-.-PhanTom-.- · TweakNOOB Joined: 21 Sep 2003 Posts: 136

Why don't you start out by reading some of the posts in this forum first?
http://www.tweaknews.net/forum/viewtopic.php?t=703
http://www.tweaknews.net/forum/viewtopic.php?t=788

and others...

lots of good information in these post... and you get info on similar issues other peeps have had..
_________________
Opteron170 @ 2.8 Ghz - NexXxoS XP AMD64, NexXxoS NVXP-3, NexXxoS NB-SLI1 Northbridge
(Laing DCC Ultra pump)
DFI Expert, 2x1 Gb G.Skill PC4000, Inno3D 7800GT
76 GB WD 10.000RPM Raptor, 300 GB Maxtor Diamondmax10 SATA, 300 GB Seagate SATA etc

[TN] Nathan · ALMIGHTY PWNER! Joined: 14 Feb 2002 Posts: 7406

Yep, check out those links seeing that al the information should be there for you.

Lots of tips and tricks to get to your goal.
_________________
Owner & Administrator
www.Tweaknews.net
www.Pocketbookpinch.com