Anoyone try the new cpuz yet.......came out today

ToggleHead · TWEAKGURU Joined: 03 Mar 2004 Posts: 4360 Location: Jersey

well....um....same as the thread name....lol

it comes with a latency timer.....but im not too sure what it means........here are my results

_________________

Google · Sponsor

Silicon Skum · Posted: Wed Sep 22, 2004 7:11 am Post subject:

L2 latency of 21?

Yikes I thought it would have been much lower than that! I have an original Celeron, even that has an L2 lat of 0 (should be 7 but I hacked it).

Hmmm, think I'm gona check the L2 on my AMDs.

§

ToggleHead · TWEAKGURU Joined: 03 Mar 2004 Posts: 4360 Location: Jersey

yeah i dont know what this is all about....check it out.........the latency tool has to be run through the cmd prompt......and i had a bunch of progs open....does that matter?
_________________

2old2care · Posted: Wed Sep 22, 2004 12:43 pm Post subject:

DUDE....WTF....that tually I'm working on has L1=3 and L2=8.

Somethings up here...I'll check this rig.
_________________
.
Liquid-Cooled Q9450 and an EeePC
.

JayDubya · Posted: Wed Sep 22, 2004 12:47 pm Post subject:

maybe it is supposed to be used from a dos based utility? Is it possible that some is already being used?
_________________
JayDubya aka JW Jay JD ^> ﺵ

ToggleHead · TWEAKGURU Joined: 03 Mar 2004 Posts: 4360 Location: Jersey

ye sit does need to be run through the cmd prompt

does thi mean my rig it STILL giving me crap?

maybe this is a different issue.......perhaps the memory is more of the problem
_________________

2old2care · Posted: Wed Sep 22, 2004 12:54 pm Post subject:

nevermind....this one is L1=2, L2=19. My work rigs a 2.4 (400FSB) 850 chipset machine. So this means what? Cause this box has been a rock for like 2 1/2 years.
_________________
.
Liquid-Cooled Q9450 and an EeePC
.